Roads go ever ever on

The End is Nigh

2009-10-25T20:12:00.003-04:00

In just about a month, I'll finally be done with what turned out to be a summer-wrecking odyssey in to the world of beer. Since June I've been a student of the American Brewers Guild Intensive Brewing Science and Engineering school, essentially doggy-paddling my way through malting, fermentation, and flavor biochemistry, microbiological beer analysis, thermodynamics, fluid mechanics, sensory science, beer maturation, clarification, water chemistry and much more. It's been fascinating to see the brewing process all the way down to the molecular level, but I'm really ready to be done. Since starting the course, most of my free time is spent in the den reading or watching dvd lectures. My family and friends are ready for me to be done too. The house renovation is on hold and I haven't thrown a leg over a bike since June. (;_;)

Happiness is a Brown Ale

2008-10-12T10:44:00.007-04:00

The Bliss is just around the corner which means I need a beer to cover my price of admission. I have a Barley Wine I can take, but it probably needs a bit more time. I have a Saison, but I've gone Belgian the last two years. I thought back to a conversation at last years Bliss where it was suggested (with tongue in cheek) that I was afraid of hops. I'll admit that in years past, I wasn't as receptive to hoppy beers as I now am and I'm still not to the point where I'm ready to chew on a mouthful of hops like some of you are, but I'm digging a bit more bitterness in my beers these days. So, for this year's Bliss, I give you my Brown Ale.

16 Plato (1.066)
61.2 IBU

68% 2-Row Malt
10% Caramel Malt (40L)
8% CaraPils Malt
8% Wheat Malt
4% Chocolate Malt
2% Special Roast

1.38 oz N. Brewer hops - 8.8% aa (60 mins)
0.75 oz N. Brewer hops - 8.8% aa (15 mins)
1.38 oz Cascade hops - 6.3% aa (10 mins)
1.5 oz Cascade hops - 6.3% aa (0 mins) 10 min. steep
1.5 oz Amarillo hops - 8.5% aa (0 mins) 10 min. steep

50 mL 1st generation, Troegs house ale yeast slurry

Summer Recap

2008-10-09T07:07:00.006-04:00

Yeah, it's been a while. It turned out to be a pretty busy spring and summer.

Work around the house continued, with no real end in sight. We have paint on most of the walls, the yard is starting to look pretty good, and we took care of a much needed replacement for our circa 1900, ~50% efficiency coal furnace. All in all, a pretty expensive summer. x_x

Even with the job and the toddler, I still managed to throw a leg over a bike every now and again. I've primarily been tooling around the Lake Williams/Lake Redman and Rocky Ridge trails in York with my brother-in-law but the highlight was our trip to the Kingdom Trails for a weekend with some of the Ridemonkey crew. If you haven't been there, stop thinking about it and go. You won't regret it.

Life at the brewery continues to be good. In July we competed in a "Battle of the Brewery Bands" hosted by Stoudt's in Adamstown. Everyone had a great time and all the proceeds went to charity. Oh, and we won! (that's me in the grey wool cycling cap rockin' the pennywhistle)

The highlight of the summer was my promotion at work. With the marriage and departure of one of our brewers, we had an opening and they offered it to me. Of course I said yes. Now for the phrase I can't say without a big grin on my face:

I am a professional brewer

Pretty sweet, eh? I had always hoped it might happen, but never expected it to happen so soon. Needless to say, I'm ecstatic. After two decades of trying to figure out what I want to be when I grow up, I have finally realized the answer and I'm living it. I honestly look forward to going to work every day.

So there you have it. Summer 2008, abridged.

Cheers!

3rd Annual Bootlegger's Bliss

2008-09-23T20:10:00.001-04:00

Yeah, I know, it's been a while. Excuses coming soon. For now, peep this:

Get your brew on. The Third Annual Bootlegger's Bliss will be launched upon an unsuspecting and largely uncaring world on SATYRDAY, NOVEMBER 1st. Information on registration and other event details will be posted soon.

In the meantime, and for the benefit of those unfamiliar with this mid-Atlantic rolla-puh-brewza, I've resurrected below the official Maniblissto from a past post. For a broader understanding of the Bliss, go here.

Iron Chef...Brewing?

2008-04-20T09:17:00.004-04:00

It's been over a month since I started working at Troeg's and I'm happy to say that my feelings about the job have not changed. I'm still loving it. The people that work there are a huge part of why I'm enjoying it so much. Unlike my last job, there's no us/them division between those in charge and those who aren't. It's not uncommon to see the owners working the bottling line or driving a forklift. Likewise, you'll occasionally see John, the head brewer, asking a homebrewer about experiences with a particular technique or for thoughts on a new recipe.

To keep the good vibes going, John has come up with a bit of friendly competition: a brewing contest. The only limitations are that it: 1) must be brewed onsite with the brewery's 5 gallon pilot system, 2) it must be ready to drink by the first week of August, and 3) it must use the common "Iron Chef" ingredient. This round's ingredient is sugar. The twist is that each team was given a different form of sugar: molasses, honey, brown sugar, or maple syrup. The winners get their names on a trophy to be displayed in the brewery's tasting room. John also mentioned the possibility of the best beer being brewed on the big system and released as part of their Scratch Beer series.

All the employees were divided into 4 teams. My team drew maple syrup. We've got some recipe ideas already, but are unsure of the best way to get the maple to come across in the finished product. If anyone has any ideas, please let me know.

Living the dream....sort of

2008-03-14T20:11:00.004-04:00

I left the glamorous life of a DoD contractor 2 years ago to become a full-time, stay-at-home dad which has been, without a doubt, the most rewarding experience of my life. If you get a chance to do this, don't hesitate, do it. In the last 2 years I've seen first-hand the miraculous transformation we all go through from slobbering poop machine to walking, talking, miniature person. The only down-side to the whole adventure was that the only conversation I've had for a majority of my waking hours has been with a slobbering poop machine, now miniature person. So, to those of you I've cornered and rambled at, sometimes on and on and on, I'm sorry, I was starving for talk about something other than what color everything is.

To remedy my problem I decided I had to get more interaction with other grown-ups. I had to return to the workforce. The thought of returning to the life of Defense work I had previously known was enough to make me ill. The money was good, but there is something to be said for wanting to go to work in the morning. I was standing in the tasting room at the Tröegs Brewing Company when it hit me: I needed to work in a brewery. What more noble employment than that in a place where they make beer? None, I say. After a brief conversation with head brewer, John Trogner, during which he encouraged me to apply, I thought "why not?" I love beer. Even more, I love making beer. The combining of water, grains, flowers, and fungus to end up with something so delicious is magical. I had to be part of it.

After several weeks and a couple of interviews, I'm now a full-time employee of the Tröegs Brewing Company in Harrisburg, PA. I'd love to say that I'm brewing, but I'm working in the packaging side of the house. The work can be physically demanding, but I'm loving it. The employees all seem to share a love of good beer and good music. A couple of them even mountain bike. I've only been there a week, but so far, so good.

Cheers

Leap of Faith

2008-03-03T19:37:00.004-05:00

In the weeks leading up to February 29th, I saw various posts on the brewing boards about folks planning to brew something special on the extra day of this intercalary year. Most folks were simpling planning to commemorate the day by brewing. I hadn't planned to do anything, but then had an idea: could I brew something big and let it age until the next leap year in 2012?

Aging for four years. That's a long time to not drink my beer. To date my longest aging was a single bottle of a Belgian-style dark strong ale that I lost track of in my basement. When I finally found it, it was 16-months old...and delicious. :)

After a couple beers I figured "what the hell" and started looking at the logistics of brewing an English-style Barley Wine.

"229"
20 lbs Maris Otter Pale Malt
9 oz Crystal Malt (120L)
9 oz Caramunich malt
Target hops - 57 IBUs (60 mins)
0.5 oz E. Kent Goldings (20 mins)
0.5 oz E. Kent Goldings (flameout)
London Ale yeast (WLP013)

Est. OG: 1.100

Brewing this presented some unique problems. The grain bill was easily twice the size of anything I had brewed before. There was no way I could brew this recipe without substituting in some extract in place of grain, which I really didn't want to do. I finally resolved to cut the batch size in half and be done with it.

When I went to pick up the ingredients, one of the shop guys suggested brewing half one day, pitch the yeast and let fermentation start, then brew the other half the next day and add it to fermenter. Brilliant.

By the time I finished up day two, the first day's work was just shy of high kraeusen. Adding more wort to it was the equivalent of adding a 3 gallon starter to a 3 gallon batch. Within 4 hours the foam was pushing in to the blow-off hose that I thankfully remembered to affix.

Check back in four years to see how this one turned out.

Maybe I'll check on it around Christmas...you know, to make sure everything is working out alright. ;)

Brewing With Bugs

2008-01-03T15:43:00.002-05:00

My first experience with a sour Flanders Red Ale was at The National Geographic Museum in DC. Michael Jackson was our host and he had arranged for Rodenbach Foederbier to be on the menu for the evening. At the time, I didn't realize how lucky we were. Foederbier is only available at De Zalm, the brewery's cafe in Roeselare, West Flanders, dispensed by hand-pump. What I did realize was that these are incredible beers. Since that night I've been fascinated with the idea of trying to replicate one at home.

It was last spring that I came across several presentations by Raj Apte. In them he discusses, among other things, the oxygen permeability of various materials and comparisons of surface area exposure in various barrel sizes. One of his conclusions is that the small (5, 10, 15 gal) wood barrels used by homebrewers expose way too much surface area to the wood, relative to barrel volume. He set out to replicate, as closely as possible, the exposure experienced while aging in a 10,000 to 60,000 liter tun. His method? A toasted oak stopper.

So, there it is in all it's lumpy, fuzzy, glory. The fuzz is the pellicle from the bacteria and yes, it's supposed to do that. Yummy. The grain bill is primarily Pilsner malt built up with Vienna, Munich, and various Belgian malts. Traditionally, stale hops are used to impart the natural preservative nature, but none of the bittering qualities of the flower. I used a small quantity of low aa% hops that should get lost in the other flavors of the beer. I started fermentation with a very neutral yeast, then added Wyeast Roeselare Ale blend (#3763) which, as I understand it, is a combination of yeasts, including brettanomyces, and a blend of lambic bacteria cultures. It's been sitting there since August and will continue to sit until February or until it's oaky enough. Then the stopper comes out and I affix a regular airlock, and it sits until next August, or until it's sour enough, before bottling.

Cheers!

Kolsch

2007-12-15T16:11:00.001-05:00

My sister's wedding is right around the corner and she came to me with a dilemma. She and I both brew and our tastes, while not favoring any style in particular, stay as far away from your run-of-the-mill, American, mass-produced beers as possible. We had planned to brew all the beer for the reception and make soda for the kids. Her problem was that her fiancée requested a "Coors Light-type" beer for his friends and family.

What beer tastes good, but is delicate enough to not offend the tastes of the light beer crowd?

Kolsch.

From the BJCP: "A clean, crisp, delicately balanced beer usually with very subtle fruit flavors and aromas. Subdued maltiness throughout leads to a pleasantly refreshing tang in the finish. To the untrained taster easily mistaken for a light lager, a somewhat subtle pilsner, or perhaps a blonde ale." Sounds perfect.

For a 5 gallon batch:
93% Pilsner Malt
5.5% Wheat Malt
1.5% Munich Malt
Hallertauer hops(60 min) 21.1 IBU
Hallertauer hops(5 min) 1.4 IBU
WLP029 Yeast

Mash: 149F, 70 min
Mash out: 168F, 10 min

OG: 1.046
FG: 1.011

Fermentation:
10 days, 65F
25 days, 35F

Carbonated to 2.5 volumes

The finished beer, while not fully carbonated yet, is delicious! It's a crystal clear pale yellow, has a subtle fruity aroma, a slight sweetness on the tongue, and finishes dry and crisp. It's not Coors Light (thank heavens), but I think they'll like it.

Time Flies...

2007-12-09T14:53:00.001-05:00

...whether you're having fun or not. Believe me, I was not. I had another of those home remodeling/repair surprises kick me in the teeth. I pulled up the nasty carpet on the stairs back at the beginning of November. I figured it would be relatively easy to strip the glue and old finish and then refinish the wood, much like I did on most of the first floor. Long story short...I finished building a new stair case the other day. You can stop reading here if you only like short stories.

The wood under the carpet was so dry and brittle that I could pull most of the treads apart with nothing but my hands. Several treads were broken and I am really surprised that no one had fallen through them. I replaced the worst of the treads with what I had on hand then went off to purchase proper oak treads to replace all of the old ones. It's important to note at this point that my house is old. It was built in 1900 and back then, 1 inch = 1 inch. See where this is going?

No?

Alright, the original stairs were made of 1 inch oak treads and risers mounted on a triple stringer. Moulding was cut from 1" by 12" by x' oak boards to fit precisely along both sides of the staircase, covering the seam where the edges of each step meet the walls, and capped with a nicely milled piece of trim. The result is a very neat and finished look. For whatever reason, today's lumber is smaller than the specified size would have you believe. For example, a 2x4 stud is really only something like 1 3/4" by 3 1/2". Weird. So, the 1" by 10" boards I needed to make the stair treads only measured 3/4" by 9 1/2"...not big enough. This also meant I would have a bigger gap than originally between the tread and the moulding.

So, I had to buy 1" by 12" oak lumber, cut it to size, add a nice round edge with the router, stain, poly, and install 11 steps with spacers to make up for the old inch/new inch difference, and add new painted risers. I also installed new oak flooring on the landing. What a pain in the ass. The only thing left is to touch up the nail holes, put a fresh coat of paint on the risers, and either restore the original woodwork, if that's possible after my less than gentle demolition of the old stairs, or cut all new and try to match a modern stain/varnish combo to the color of 100-year old varnish. (>_<)

Bikes and Beers

2007-11-06T19:54:00.001-05:00

I actually got dirt under my wheels this weekend! Saturday was the 2nd Annual Bootlegger's Bliss...a day of good rides, good eats, and plenty of home-brewed beers. Props to Steve over at Wrench In The Gears for putting it all together this time around.

This year the Bliss brought 15-20 of us together at Rosaryville State Park. I can't believe that I lived in the DC area for nearly 10 years and this was the first time I got out there to ride. Big mistake, this place is a hoot. Riderx describes it best as a "dirt rollercoaster."

We set out as one group, most of us on singlespeeds. The SSO Factory Team quickly left me in the dust, but the trail provided enough distractions in the form of various log stunts, that they were never out of sight for too long.

Once the ride was done, we moved on to the food and beers. There were a lot of great beers on hand: IPAs, double IPAs, porters, stouts, tripels, maibock, dunkel, and more. As good as they all were, I'd have to name ShivaSteve's Vanilla Bourbon Porter as my favorite of the day: a great porter with a slight bourbon oakiness, and just a hint of vanilla...very nice.

Of course, the alcohol brought out the silliness, first in the form of fixed-gear trials on a picnic table followed by several rounds in the derby. Ouch!

All in all, a great day. Any day in the saddle is a great day, but when you can share the time with a group of like-minded folks, it only makes it that much better. There was already talk of where and when next year's Bliss will be held. I'm looking forward to it. I've got a Flanders Red aging in the basement that should be good to go by next November and I'm working up an American Amber or Brown recipe...gotta prove to some of the guys that I'm not afraid of the hops. :)

Goodbye To A Friend

2007-10-30T13:05:00.001-04:00

Glad to have known you.
7/7/94-10/30/07

New Kayak

2007-10-16T22:07:00.000-04:00

The new boat is finally done. I say finally, because it's been a long time coming. It's been nearly 18 months on this one. I knew it would be on the market when finished and I lost motivation to get her done. I really don't want to see her go, but it's for sale. It's a CLC Chesapeake 16LT. They are wonderfully versatile boats. I use mine regularly on local flat water and have even launched into chest-high surf on several occasions.

She is of okoume (African Mahogany) plywood construction completely sheathed in layers of fiberglass fabric and epoxy. All hull seams have 3" fiberglass tape reinforcement internally. The hull is painted with marine polyurethane and the deck is bright finished with marine varnish. Watertight bulkheads and hatches, deck rigging, and adjustable footbraces installed. Included, but not installed: thigh braces, back band, and foam seat.

Details
Length: 15' 8"
Beam: 23"
Depth: 12"
cockpit size: 31"x17"
Weight: ~42 lbs
Knee height: 11.5"
Max shoe size (men's): 10
Recommended paddler weight: 100-150lbs (I comfortably paddle mine at 155lbs)
Max payload: 220lbs

Hat Trick Ale

2007-10-09T19:21:00.001-04:00

I rolled out the tripel for it's first official tasting this weekend. It's been laying down for a couple of months now and I was looking forward to getting some feedback. A good friend who is probably the one person most responsible for introducing me to good beer had this to say: "Holy sh*t, you made this? Wow...this is great!" Glad to hear others think it's as good as I do. :)

Bliss is GO!

2007-09-25T23:11:00.002-04:00

A bunch of like-minded folks riding bikes, drinking homebrewed beer, and sharing tasty eats... sound fun? I just found out that the 2nd annual Bootlegger's Bliss has been put on the calendar.
Date: November 3rd
Riding: sure to be sick
Price of admission: 1 six-pack of homebrew and some food to share
Location: top secret

Get the skinny over at Wrench in the Gears.

Lager Delirium

2007-09-22T16:13:00.001-04:00

Lager... birds... footie... fags....
Fags... footie... birds... lager!

Lager! Birds! Footie! Fags!

La la la la... lager delirium.

-Bad Manners

I brewed my first lager on the 10th...a Munich dunkel, to be exact. All went well, but I'm not used to the waiting. All my brews to date have been ales and I'm usually drinking them within a month of brewing them. Lager, from the German lagern ("to store"), is a beer that's fermented relatively cold and then stored for a month or more at close to freezing temperatures to clarify the beer's appearance and smooth the flavor. Mine has only been lagering since the 18th and has a way to go, yet I still peek in the lagering cooler a couple times a day. I don't know what I'm expecting to see. It's just a big tank of brown liquid. Actually, it's a big tank of brown beer. I should go check on it...

Post #1

2007-09-06T19:22:00.000-04:00

Roads go ever ever on,
Over rock and under tree,
By caves where never sun has shone
By streams that never find the sea
Over snow by winter sown,
And through the merry flowers of June,
Over grass and over stone,
And under mountains of the moon.

Roads go ever ever on
Under cloud and under star,
Yet feet that wandering have gone
Turn at last to home afar.
Eyes that fire and sword have seen
And horror in the halls of stone
Look at last on meadows green
And trees and hills they long have known.

-JRR Tolkein

My name is Tim. I grew up in Small Town, America and couldn't wait to get out... few open doors, fewer open minds. Eventually I made the trek to the big city and got a job working for The Man. Nine years goes by and I realize it's killing me. Sure, I met the love of my life, had a son, met some great people, and did some fun things in that time, but they are the shining stars in an otherwise empty sky. Small Town, America, with all of its faults, is looking like a pretty nice place to be. So, "...feet that wandering have gone turn at last to home afar..."